EVERWELL 1-1/8 INCH DRYER FILTER SHELL, TAKE APART, 1 CORE, LIQUID OR SUCTION LINE, SOLDER

$78.00

  • Everwell dryer filter shell
  • Size: 1-1/8″ ODF
  • 1 Core
  • Connection: Solder
  • MWP: 680 PSIG
  • Cubic Inches: 48
  • For use with: R134A/48TN, R12/40TN, R22/53TN, R410A/R407C/35TN, R502/34TN
SKU: SPL-489 Category: Brand:

Description

The Everwell take-apart filter drier shell series offers the flexibility of use on liquid or suction line service. By installing the molded, desiccant filter drier block within the shell, complete liquid line protection is ensured. For the ultimate in large capacity suction line filtration, install the replaceable filter cores within the shell. Also, offer the ability to be used for cleanup following a compressor burnout. Replaces STAS.

Everwell take apart filter drier shells feature: sturdy steel shell for long-life durability, simplified internal hardware for easy installation, full flow fittings for the low-pressure drop, corrosion-resistant epoxy powder paint finish, for liquid line & suction line service, unit size: 48 cubic inches, filtration recommended 40 microns and max. working pressure: 500 PSIG-T / 400 PSIG-SV.

Additional information

Weight 12 lbs
Dimensions 13 × 9 × 8 in
Brand

Everwell

Conn size

1-1/8 In.

Conn type

Solder

Size

48 Cubic In.

Other info

1 Core

Description

Parts – Aftermarket

EVERWELL, 5/8 INCH DRYER FILTER SHELL, TAKE APART, 1 CORE, LIQUID OR SUCTION LINE, SOLDER

EVERWELL 1-1/8 INCH DRYER FILTER SHELL, TAKE APART, 1 CORE, LIQUID OR SUCTION LINE, SOLDER

$78.00