- QE Flow Switch
- Water Hammer
- 125 VA
- 120-240 V
- 50/60 Hz
- Max Pressure: 10.5 Kg/Cm (150 PSI)
- Connection: G1 Inch NPT
- Replaces: F61KB-11PEN
- Fluid Temp: 32 to 250 F
Description
The QE flow switch specifications: rating Content: 125VA, 120-240VA, 50/60Hz, Max Pressure: 10.5 Kg/Cm (150 PSI), connection: G1”, max Rate of Flow: 38.6 LPM, min Rate of Flow: 13.62 LMP, for use with tees or welded half-couplings, must not be subjected to water hammer, and if the fast-closing valve is located downstream of flow switch, a suitable water hammer arrester must be used.
Additional information
| type | |
|---|---|
| size | |
| amps | |
| Brand | QE |
| hp | |
| voltage | |
| Voltage | 115-220, 208-240 |
| Hz | 50/60 |
| Conn size | 1 to 2 In. |
| Description | Parts – Aftermarket |
Related products
-
-
$40.80- Everwell Flow Switch
- Water Hammer
- 125 VA
- 120-240 V
- 50/60 Hz
- Max Pressure: 10.5 Kg/Cm (150 PSI)
- Connection: G1 Inch NPT
- Replaces: F61KB-11PEN
- Fluid Temp: 32 to 250 F
-
$1,086.76- Cutler Hammer – Eaton Starter
- Electrical Starter
- 110/120Vac
- 50/60Hz Coil
- 3 Pole
- 45 Continuous Amps
- NEMA Size 2
- Open Type Enclosure
- Single or Three Phase
- Non-Reversing NEMA Motor Starter with Ambient Compensated Bimetallic Overload Relay and One Normally Open Auxiliary Contact (Heater Packs not Included)
-
