QE
-
New
$44.00- Shaded pole fan motor
- Output: 25 Watts
- Power: 200-240 Volts
- Fan Size: 9-5/6″ – 11-4/5″
- Hz: 50/60
- RPM: 1550
- Rotation: CCWSE
- Include motor, base mount, and fan blade
-
$298.00- QE Vibration Eliminator
- 2-5/8″ OD connection
- 10″ length
- Max Working Pressure: 650 PSI
- Burst Pressure: 2500 PSI
- Copper Flex
-
$170.00- QE access schrader charging valve
- R-410A, R-134A, R-22, R-12
- 4″ Long Capillary Connection
- .025″ Wall Thickness
-
$47.00
- QE Vibration Eliminator
- 3/4″ OD connection
- 10″ length
- Max Working Pressure: 650 PSI
- Burst Pressure: 2500 PSI
- Copper Flex
-
$34.00
- QE Vibration Eliminator
- 1/2″ OD connection
- 9″ length
- Max Working Pressure: 650 PSI
- Burst Pressure: 2500 PSI
- Copper Flex
-
$320.00- QE Axial Fan Motor
- Voltage: 220
- Hz: 50/60
- Watts: 1150
- Fan Blade Dia.: 24.80″ / 630 mm
- Rotation: 1625 RPM
- Noise Db(A): 85
- AMP: 4.50
- Max Ambient Temp.: 140º F continuous duty
-
$160.00- QE Fractional Refrigerator Compressor
- HP: 1/5
- Volts: 110-120
- 50/60 Hz
- BTU’s: 546
- AMP’s: 1.80
- Ambient Temp.:Â 90 F / 32 C
-
Out of Stock
$46.00- QE Copper Capillary Tubing
- Inside Diameter: .031 Inch
- Outside Diameter: .083 Inch
- Length: 100 Feet
- Coil Weight: 1.81 lbs.
-
$14.68- QE liquid line filter drier
- Size: 5/8″ ODF
- Cap. (Tons) R404A: 7.01
- Cap. (Tons) R410A: 10.45
- Connection: Solder
- Cubic Inches: 16
-
$92.00- QE floor mounting base kit
- Mount directly onto concrete or leave unfastened as desired
- Outer rubber shell provides superior vibration absorption
- 2000 lbs. uniform load
- 16″ x 6.5″ x 4″ Each
- Foot with Steel Strut, Screws, & Accessories
- Heavy Duty Compressed Rubber & Galvanized Steel
-
$984.51- QE copper tubing
- Outside Diameter: 5/8″
- Wall Thickness: .035″ / .89 MM
- Weight: 12.5 lbs.
-
$1,198.55
- QE copper tubing
- Outside Diameter: 3/4″
- Wall Thickness: .035″ / .89 MM
- Weight: 15.3 lbs.
-
$156.38
- QE copper tubing
- Outside Diameter: 1/2″
- Wall Thickness: .032″ / .81 MM
- Weight: 9.1 lbs.
-
$65.56
- QE copper tubing
- Outside Diameter: 1/4″
- Wall Thickness: .030″ / .76 MM
- Weight: 4.2 lbs.
-
$1,069.96
- QE copper tubing
- Outside Diameter: 7/8″
- Wall Thickness: .035″ / .89 MM
- Weight: 17.5 lbs.
-
$859.39
- QE copper tubing
- Outside Diameter: 5/16″
- Wall Thickness: .032″ / .81 MM
- Weight: 5.5 lbs.
-
$104.00
- QE Copper Capillary Tubing
- Inside Diameter: .070 Inch
- Outside Diameter: .125 Inch
- Length: 100 Feet
- Coil Weight: 3.51 lbs.
-
$9.47
- QE liquid line filter drier
- Size: 1/4″ SAE
- Cap. (Tons) R404A: 1.69
- Cap. (Tons) R410A: 2.28
- Connection: Flare
- Cubic Inches: 8
-
-
-
$47.47
- QE mini split evaporator fan motor
- Watts: 22
- Volts: 208-230
- Hz: 50/60
- Rotation: CW
- Motor Height: 2-1/2 Inches
- Motor Diameter: 3-3/4 Inches
- Shaft Length: 3 Inches
-
$47.47
- QE mini split evaporator fan motor
- Watts: 22
- Volts: 208-230
- Hz: 50/60
- Rotation: CW
- Motor Height: 2-1/2 Inches
- Motor Diameter: 3-3/4 Inches
- Shaft Length: 3 Inches
-
$34.02
- QE mini split evaporator fan motor
- Watts: 12
- Volts: 208-230
- Hz: 50/60
- Rotation: CW
- Motor Height: 1-1/4 Inches
- Motor Diameter: 3-3/4 Inches
- Shaft Length: 3 Inches
-
-
-
-
-
-
-
-
-
-
-
-
-
-
$320.83- QE insulations sheets
- Size: 3/4″ Thick x 4′ Long x 3′ Wide
- 8 Sheets = 96 Sq. Ft.
- High Temp. Range: 220 Degrees F
- Low Temp. Range: -40 Degrees F
-
$344.09
- QE insulations sheets
- Size: 1/2″ Thick x 4′ Long x 3′ Wide
- 12 Sheets = 144 Sq. Ft.
- High Temp. Range: 220 Degrees F
- Low Temp. Range: -40 Degrees F
-
$53.82
- QE line piercing valve
- Tube Size: 5/8″ and 1/2″
- Use: high pressure end
- Permanent valve
- Full kit included
-
- QE potential relay
- Cont. Coil Voltage: 332
- Pick Up Min.: 168
- Pick Up Max.: 182
- Drop Out Max.: 90
- HP: 1/2 to 1
- Compressor Voltage: 115
- 50/60 Hz
-
$304.20
- QE potential relay
- Cont. Coil Voltage: 170
- Pick Up Min.: 139
- Pick Up Max.: 153
- Drop Out Max.: 55
- HP: 1/4 to 1/2
- Compressor Voltage: 115
- 50/60 Hz
-
-
-
-
-
$33.50
- Shaded pole fan motor
- Watts: 18
- Volts: 220-240
- Hz: 50/60
- RPM: 1500
- FB Diameter: 10″
- Rotation: CCWSE
- Include motor, base mount , and fan blade
-
$30.89
- Shaded pole fan motor
- Watts: 16
- Volts: 220-240
- Hz: 50/60
- RPM: 1600
- FB Diameter: 10″
- Rotation: CCWSE
- Include motor, base mount , and fan blade
-
$18.13
- Start Capacitor
- 340-408 UF (MFD – Microfarad)
- 220-250 V
- Dry Electrolytic
- Dual Terminals w/ Quick Connectors
- Approx. 1.75″ Diameter x 3.5″ Height