Climatemaster ASW016STC, ZS2, Wall Thermostat, Temperature Sensor, Std for Mpc

ClimateMaster part — Climatemaster ASW016STC, ZS2, Wall Thermostat, Temperature Sensor, Std for Mpc

The ClimateMaster part (manufacturer part ASW016STC) is a genuine OEM part available at Cedars HVAC, your trusted source for heating, cooling, and refrigeration parts. We stock this ClimateMaster part for fast nationwide shipping from our Miami warehouse, so contractors, facility managers, and homeowners can get the exact replacement they need without delay.

Product details

Application: ASW sensors are wall-mounted temperature sensors for use with the MPC controller on Water-to-Air units. The ASW is available in 3 different models to allow for application flexibility. Features such as room temperature sensing, digital LCD readout, set point adjustment, override push button, heat pump reset, lockout recognition, fault type, LED indicator, cosmetics and occupancy status can be supplied by the different types of ASW wall sensors. The ASW wall mounted sensors are low profile, which provides a distinguished look for building architects and engineers.

Wiring: PREREQUISITE: The RNet cable is wired to the controller. The shield wire and the ground wire should be inserted into the controller’s GND terminal, insert the other 4 wires into the RNet Sensor’s screw terminal connector. If wiring 2 cables, insert like colored wires into each terminal. It is recommended that you use the following RNet wiring scheme: Connect this wire… To this terminal… Red +12V, Black RNet-, White RNet+, and Green Gnd.

Power Requirements Sensor Type Power Required: • Temperature Only All Models 12 Vdc @ 8 mA Temperature with Humidity • Temp with VOC, or Temp/VOC/Humidity All Models 12 Vdc @ 60 mA • Temp with CO2 , or Temp/ CO2 /Humidity All Models 12 Vdc @ 15 mA (idle) to 190 mA (CO2 measurement cycle).

Power Supply: controller supplies the Rnet sensor network with 12 Vdc @ 210 mA: • Additional power may be required. See sensor power requirements above.

Communication: • 115 kbps Rnet connection between sensor(s) and controller 15 sensors max per Rnet network; 5 sensors max per control program.

Local Access Port: • For connecting a laptop computer to the local equipment or WebCTRL® network for maintenance and commissioning.

Environmental Operating Range: • 32° to 122° F (0° – 50° C), 10% to 90% relative humidity, non-condensing.

Mounting Dimensions: • Standard 4”x 2” electrical box using provided 6/32” x 1/2” mounting screws.

Overall Dimensions: • Width: 2.75” (6.99 cm) Height: 4.75” (12.07 cm) Depth: 13/16” (2.01 cm).

Why buy from Cedars HVAC

• Genuine OEM ClimateMaster part — not aftermarket substitute
• Contractor-friendly pricing
• Fast nationwide shipping from Miami, FL
• Real HVAC expertise — call us at (305) 850-6693 if you need help confirming compatibility
• Financing available through Affirm and PayPal Pay Later

About this ClimateMaster part

This ClimateMaster part is part of our Thermostats catalog. Contact us if you need help identifying compatible models or sourcing volume quantities. For installation guidance, always refer to the manufacturer documentation and consult a licensed HVAC technician where required.

Shipping and returns

Most ClimateMaster part orders ship the same or next business day from Cedars HVAC in Miami, Florida. Standard ground shipping covers the continental United States, and expedited options are available at checkout. Returns are accepted within 30 days on unopened, uninstalled parts — see our return policy for full details.

Frequently asked questions

Is this an OEM part? Yes, the ClimateMaster part we sell is sourced through authorized channels.

Will this ClimateMaster part fit my equipment? Compatibility depends on the model. If you need help confirming fitment, call us at (305) 850-6693.

Can I get a contractor discount? Yes — request contractor pricing or call us.

Related categories

Explore more: Thermostats • All ClimateMaster parts • Browse all HVAC parts