- Everwell dryer filter shell
- Size: 7/8″ ODF
- 2 Cores
- Connection: Solder
- MWP: 680 PSIG
- For use with: R134A/37TN, R12/31TN, R22/41TN, R410A/R407C/27TN, R502/26TN
EVERWELL 7/8 INCH DRYER FILTER SHELL, TAKE APART, 2 CORE, LIQUID OR SUCTION LINE, SOLDER
$96.00
Description
The Everwell take-apart filter drier shell series offers the flexibility of use on liquid or suction line service. By installing the molded, desiccant filter drier block within the shell, complete liquid line protection is ensured. For the ultimate in large capacity suction line filtration, install the replaceable filter cores within the shell. Also, offer the ability to be used for cleanup following a compressor burnout. Replaces STAS.
Everwell take apart filter drier shells feature: sturdy steel shell for long-life durability, simplified internal hardware for easy installation, full flow fittings for the low-pressure drop, corrosion-resistant epoxy powder paint finish, for liquid line & suction line service, unit size: 48 cubic inches, filtration recommended 40 microns and max. working pressure: 500 PSIG-T / 400 PSIG-SV.
Additional information
| Weight | 12 lbs |
|---|---|
| Dimensions | 13 × 9 × 8 in |
| Brand | Everwell |
| Conn size | 7/8 In. |
| Conn type | Solder |
| Other info | 2 Cores |
| Description | Parts – Aftermarket |
Related products
-
-
$9.47- QE liquid line filter drier
- Size: 1/4″ SAE
- Cap. (Tons) R404A: 1.69
- Cap. (Tons) R410A: 2.28
- Connection: Flare
- Cubic Inches: 8
-
$6.75- Everwell liquid line filter drier
- Size: 3/8″ ODF
- Cap. (Tons) R404A: 2.54
- Cap. (Tons) R410A: 3.85
- Connection: Sweat / Solder
- Cubic Inches: 5
-
$7.54
- Everwell liquid line filter drier
- Size: 1/4″ ODF
- Cap. (Tons) R404A: 1.69
- Cap. (Tons) R410A: 2.28
- Connection: Sweat / Solder
- Cubic Inches: 8
