- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
PIONEER 1/4 X 1/2 INCH X 25 FT MINI SPLIT PIPING COPPER INSULATED LINE SET INSTALLATION KIT
$159.00
Description
The Pioneer R410a compatible copper line sets feature: Highest Quality Full Copper Piping Kit Set, Compliance with ASTM-B280 Standard (USA-Canada), Dehydrated Soft Drawn Copper Tubes, Three Layer Water Proof P.E. Insulation, Brass Flare Nuts, on ready formed flare ends, Matching Length 1 Gauge 4 Lead Signal Cable set, Plastic dust caps, to keep clean during installation, Wall Sleeve/Liner with Cap, Wall Filler Putty, and Non-Adhesive Wrapping Tape.
Additional information
| Weight | 12 lbs |
|---|---|
| Dimensions | 18 × 14 × 3 in |
| Brand | Pioneer |
| Material | Copper |
| Size | 1/4" x 1/2" x 25' |
| Description | Parts – Aftermarket |
Related products
-
$115.00- Highest Quality Full Copper Piping Kit Set.
- Compliance with ASTM-B280 Standard (USA-Canada).
- Dehydrated Soft Drawn Copper Tubes.
- Three Layer Water Proof P.E. Insulation.
- Brass Flare Nuts, on ready formed flare ends.
- Matching Length 16 Gauge 4 Lead Signal Cable set.
- Plastic dust caps, to keep clean during installation.
- Wall Sleeve/Liner with Cap.
- Wall Filler Putty.
- Non Adhesive Wrapping Tape.
-
-
$274.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$245.00
- Highest Quality Full Copper Piping Kit Set.
- Compliance with ASTM-B280 Standard (USA-Canada).
- Dehydrated Soft Drawn Copper Tubes.
- Three Layer Water Proof P.E. Insulation.
- Brass Flare Nuts, on ready formed flare ends.
- Matching Length 16 Gauge 4 Lead Signal Cable set.
- Plastic dust caps, to keep clean during installation.
- Wall Sleeve/Liner with Cap.
- Wall Filler Putty.
- Non Adhesive Wrapping Tape.
