CLIMATEMASTER 3 HEAT, 2 COOL, COMMUNICATING, AUTO/MANUAL CHANGEOVER, PROGRAMMABLE 7 DAY THERMOSTAT W/ HUMIDITY CONTROL

The Climatemaster ATC32U02C iGate® Communicating Programmable Thermostat provides 3 stages of heating, 2 stages of cooling, and programmable temperature/humidity control of 24V water-source heat pump equipment with DXM2 will communicate with the heat pump to maximize comfort and reduce energy doing so. Features include: Integrated control of both temperature and relative humidity, Integrated control eliminates separate thermostat and dehumidistat/humidistat, Thermostat can be programmed to use humidification output to control a humidifier, Digital Night Setback mode initiated by an external signal, Four periods per day, ºF or ºC temperature display, 12 or 24-hour clock, Individual heat, and cool setpoints, Zero temperature droop performance, Automatic (program mode) or manual (HOLD) operation, 7-day programming, Convenient overrides allow temporary setpoint changes, Setpoints are permanently held in memory (no batteries used) and retained during power outages, Room temperature offset adjustment, Progressive Recovery anticipates the time required to bring the space temperature to the next programmed event, and brings on the heat pump accordingly, Large backlit dot matrix display is activated whenever a key is pressed and remains on for 25 seconds, Menu-driven programming with five navigation buttons (UP/DOWN/LEFT/RIGHT/SELECT) for ease of use, Fault indication with red backlight display, Configurable service interval messages and servicing contractor contact information, Keypad lockout, Simple four wire connection, Back-plate wiring connections for easy installation, Exclusive service screens that display conditions when fault occurred, the last 5 faults, and a list of possible causes, Compatible with optional AST008C sensor for use as remote and/or outdoor sensor, or for indoor wall mounted sensor use ASW06. Electrical Rating: Input Power: 18 to 30 VAC, 50/60 Hz. Operating Conditions: 32ºF to 104ºF [0ºC to 40ºC], 10% to 95% non-condensing. Temperature Settings: Setpoint range: 55ºF to 95ºF [12ºC to 35ºC], +/- 2ºF [1ºC], Note: User must maintain thermostat setting within proper unit operating temperature range (See specific unit(s) IOM for details), Dehumidification setpoint range: 15% to 95% RH, Humidification setpoint range: 10% to 45% RH.

View Technical Specifications