- Danfoss remote
- Application: Accessory
- Temperature Range (F): 41 to 86 degrees
- Sensor Type: Remote
- Mount: Wall
- Capillary Length: 6′
- Used With: RA 2000 Valves
DANFOSS 013G8562, REMOTE SETPOINT, AND SENSOR, WALL MOUNT
$135.76
Description
The Danfoss 013G8562 is the RA2000 Thermostatic Operator, Wall Mount with Combined Remote Mounted Sensor and Dial; 6ft Cap. Tube.
Additional information
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 4 × 3 in |
| Brand | Danfoss |
| Description | Parts – OEM |
Only logged in customers who have purchased this product may leave a review.
Related products
-
$582.00- Climatemaster thermostat
- LCD Hi resolution touch screen display
- Heat pump or DX with gas or electric heat
- Up to 4 heat and 2 cool stages
- Humidity sensor included
- Internet enabled
- Can monitor any number of Wi-Fi sensors
- 7-day programmable
- Wi-Fi – free mobile apps available
- Lockout feature
- Programming and setpoints stored in non-volatile
-
$162.00- Ranco Controls
- Open/Close on Rise
- 120/208/240VAC
- -30 Degrees to 220 Degrees F
- 1 Degrees to 30 Degrees F
- Relay Input: 1
- Relay Output: 1
- 8 ft. Cable
-
Out of Stock
$410.06- Climatemaster thermostat
- With DXM2 can set ECM motor CFM from minimum to maximum by 25 CFMs; can view 6 unit sensors – Entering the water, Leaving the water, Supply Air, Discharge line, entering and leaving TXV temperatures; check inputs and see dip switch configurations
- Dehumidification output is designed to work with the Whole House Dehumidification Modulating Reheat option or with ECM fan motor dehumidification mode
-
Out of Stock
$457.98
- Climatemaster thermostat
- Dehumidification output is designed to work with Whole House Dehumidification Modulating Reheat option or with ECM fan motor dehumidification mode
- Integrated control of both temperature and relative humidity
- Integrated control eliminates separate thermostat and dehumidistat/humidistat
- Thermostat can be programmed to use humidification output to control a humidifier
- Digital Night Setback mode initiated by an external signal (when using a DXM/DXM2 controller)
Reviews
There are no reviews yet.