Danfoss 082H3041 — AME25SU, 24V, 0-10VDC, spring up

Danfoss 082H3041 actuator — Actuator

The 082H3041 actuator is a Danfoss AME25SU actuator for modulating control, identified with spring-up action, 24V operation and a 0-10VDC control signal. Distributor information also describes it as 3-point/modulating. Use the part number and actuator markings to confirm the replacement matches the installed control arrangement before installation.

082H3041 actuator specifications

• Part number: 082H3041
• Brand: Danfoss
• Model: AME25SU
• Part type: Actuator for modulating control
• Action: Spring up
• Voltage: 24V
• Control signal: 0-10VDC
• Weight: 4.92 lb

Where the 082H3041 actuator is used

In heating installations, an actuator of this type moves a compatible valve in response to a control signal, supporting regulated flow in applications such as mixing-valve assemblies. The 082H3041 actuator is identified for modulating control, with a 0-10VDC signal and spring-up action. Confirm that the valve interface, control method and replacement requirements match the installed equipment; the supplied information does not list specific compatible valve models.

Shop related parts: actuators, valves, controls.

How to install the 082H3041 actuator

1. Disconnect electrical power and follow site lockout/tagout procedures.
2. If work requires opening a refrigerant circuit, recover refrigerant using approved procedures; actuator replacement may not require circuit opening.
3. Verify the nameplate and part number, plus the 24V and 0-10VDC control arrangement, against the existing installation.
4. Mount the actuator to the compatible valve according to manufacturer instructions, ensuring proper alignment and secure fastening.
5. Reconnect wiring according to the equipment diagram, restore power, and verify commanded travel and spring-up response.

Manufacturer data, drawings and cross-references are available on the Danfoss product site. A licensed HVAC/R technician should install this part.

Frequently asked questions

What is Danfoss 082H3041?

It is an AME25SU actuator for modulating control. The supplied information identifies spring-up action, 24V operation and 0-10VDC control.

What control signal does this actuator use?

The listed control signal is 0-10VDC.

What does spring up mean for this actuator?

The product is identified as spring up. Confirm the required action for the installed valve and control setup before replacement.

How can I confirm it is the right replacement?

Compare the 082H3041 part number and actuator markings with the existing equipment. The supplied information does not list specific compatible valve models.

When will my 082H3041 order ship?

Orders are prepared and shipped within 6–8 business days.

Why buy the 082H3041 from Cedars HVAC

• Genuine new Danfoss part, sold by part number
• Priced below major online HVAC suppliers
• Orders are prepared and shipped within 6–8 business days.
• Real HVAC expertise. Call (305) 850-6693 to confirm the cross-reference before you order.