Shop
- Uncategorized
- A/C Stands
- A/C Systems
- Accessories
- Actuators
- Air Curtains
- Blower Wheels
- Capacitors
- Circuit Breakers
- Coils
- Compressors
- Contactors
- Control Boards
- Controls
- Copper Tubing
- Evaporative Coolers
- Fan Blades
- Filter Driers
- Filters (Media)
- Fittings
- Gaskets
- Heaters
- Hinges
- Insulation
- Lamps
- Latches
- Line Sets
- Meters
- Moisture Indicators
- Motors
- Oil Separators
- Oils
- Overloads
- Pumps
- PVC Curtains
- Refrigeration Systems
- Relays
- Sensors
- Service Kits
- Shaft Seal Kits
- Solder And Brazing
- Start Kits
- Suction Line Accumulators
- Switches
- Tapes
- Thermometers
- Thermostats
- Timers
- Tools
- Transformers
- Valves
- VFDs
- Vibration Eliminators
- Voltage Protectors
- Water Heaters
2377 Products
Filters
“PIONEER 30,000 TO 48,000 BTU FLOOR MOUNTING BLOCK BASE KIT FOR SPLIT AIR CONDITIONING SYSTEMS (2 PIECES/ORDER)” has been added to your cart. View cart
-

$98.00The Pioneer professional grade 4 lead electrical cable offers exceptional performance. Rated for outdoor or indoor use, this cable is the perfect choice for outdoor installations, be it above or underground. Features: 16 AWG – 4 standard conductors, Tough, yet flexible black insulated jacket is marked with a stripe on one side for polarity and FT count for easy installation, and 1.31 mm conductors provide exceptional performance.
-

$395.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$300.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$274.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$214.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$209.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$159.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$149.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$114.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$99.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$255.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$180.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$135.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$104.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$79.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-

$74.75- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$38.00- Pioneer foldable mini split mount bracket set
- Heavy Duty Steel Construction, Galvanized and Epoxy Painted.
- Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.
- 4 Rubber vibration absorbers also included.
- Multiple sizes to choose from. Pick the bracket that fits the BTU output of your machine.
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
-
$34.00- Pioneer foldable mini split mount bracket set
- Heavy Duty Steel Construction, Galvanized and Epoxy Painted.
- Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.
- 4 Rubber vibration absorbers also included.
- Multiple sizes to choose from. Pick the bracket that fits the BTU output of your machine.
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
-
$29.00- Pioneer foldable mini split mount bracket set
- Heavy Duty Steel Construction, Galvanized and Epoxy Painted.
- Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.
- 4 Rubber vibration absorbers also included.
- Multiple sizes to choose from. Pick the bracket that fits the BTU output of your machine.
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
-
$27.00- Pioneer foldable mini split mount bracket set
- Heavy Duty Steel Construction, Galvanized and Epoxy Painted.
- Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.
- 4 Rubber vibration absorbers also included.
- Multiple sizes to choose from. Pick the bracket that fits the BTU output of your machine.
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.


















