Baldor-Reliance (ABB) 36N231S109G1 — 3 HP, 1760 RPM, 3-phase, 60 Hz, 182TC

Baldor 36N231S109G1 motor — Motor

The 36N231S109G1 motor is a Baldor-Reliance (ABB) three-phase motor rated at 3 HP and 1760 RPM. The distributor description identifies it for 60 Hz service and a 182TC frame. Use the supplied part number and motor nameplate to confirm the replacement match before installation; no additional electrical or application ratings are provided here.

Photo is representative of this part type. Always order by part number and match it to the equipment nameplate.

36N231S109G1 motor specifications

• Part number: 36N231S109G1
• Brand: Baldor-Reliance (ABB)
• Horsepower: 3 HP
• RPM: 1760
• Phase: 3-phase
• Frequency: 60 Hz
• Frame: 182TC

Where the 36N231S109G1 motor is used

The 36N231S109G1 motor is intended for use wherever a compatible 3 HP, three-phase motor with 1760 RPM, 60 Hz operation and a 182TC frame is specified. In HVAC/R service, motors of this type may drive equipment such as fans, pumps, or other mechanically coupled loads, depending on the system design. Confirm the equipment documentation, mounting arrangement, shaft requirements, and nameplate before selecting or installing this motor.

Shop related parts: motors, capacitors, VFDs, contactors.

How to install the 36N231S109G1 motor

1. Disconnect and lock out power to the equipment before beginning work.
2. Verify the replacement motor’s part number and nameplate against the equipment requirements.
3. If the work requires opening a refrigerant circuit, recover refrigerant according to applicable procedures.
4. Record existing wiring connections, then mount the motor and reconnect wiring according to its nameplate or wiring diagram.
5. Restore power and check motor operation and the connected equipment.

Manufacturer data, drawings and cross-references are available on the Baldor-Reliance (ABB) motor catalog. A licensed HVAC/R technician should install this part.

Frequently asked questions

What is the 36N231S109G1?

It is a Baldor-Reliance (ABB) motor identified as 3 HP, 1760 RPM, three-phase, 60 Hz, with a 182TC frame.

What is the motor’s horsepower and speed?

The supplied description lists 3 HP and 1760 RPM.

What phase and frequency are listed?

The motor is listed as three-phase and 60 Hz.

What does 182TC refer to?

The distributor description identifies 182TC as the motor’s frame designation. Confirm the required frame against the equipment documentation before ordering.

When will my 36N231S109G1 order ship?

Orders are prepared and shipped within 5–7 business days.

Why buy the 36N231S109G1 from Cedars HVAC

• Genuine new Baldor part, sold by part number
• Priced below major online HVAC suppliers
• Orders are prepared and shipped within 5–7 business days.
• Real HVAC expertise. Call (305) 850-6693 to confirm the cross-reference before you order.