Shop
- Uncategorized
- A/C Stands
- A/C Systems
- Accessories
- Actuators
- Air Curtains
- Blower Wheels
- Capacitors
- Circuit Breakers
- Coils
- Compressors
- Contactors
- Control Boards
- Controls
- Copper Tubing
- Evaporative Coolers
- Fan Blades
- Filter Driers
- Filters (Media)
- Fittings
- Gaskets
- Hard Start Kits
- Heaters
- Hinges
- Insulation
- Lamps
- Latches
- Line Sets
- Meters
- Moisture Indicators
- Motors
- Oil Separators
- Oils
- Overloads
- Pumps
- PVC Curtains
- Refrigeration Systems
- Relays
- Sensors
- Service Kits
- Shaft Seal Kits
- Solder And Brazing
- Suction Line Accumulators
- Switches
- Tapes
- Thermometers
- Thermostats
- Timers
- Tools
- Transformers
- Valves
- VFDs
- Vibration Eliminators
- Voltage Protectors
- Water Heaters
-
$346.92- Eaton Variable Frequency Drive
- Frame Size: FR1
- kW Rating (CT / High Overload): 0.37 (230 V / 50 Hz)
- HP (CT / High Overload): 0.5 (230 V / 60 Hz)
- Amperage (Current): 3
- kW Rating (VT / Low Overload): 0.75 (230 V / 50 Hz)
- HP (VT / Low Overload): 1
- Amperage (Current): 4.8
-
$281.98
- Eaton Variable Frequency Drive
- Frame Size: FR1
- kW Rating (CT / High Overload): 0.18 (230 V / 50 Hz)
- HP (CT / High Overload): 0.25 (230 V / 60 Hz)
- Amperage (Current): 1.6
- kW Rating (VT / Low Overload): 0.37 (230 V / 50 Hz)
- HP (VT / Low Overload): 0.5
- Amperage (Current): 2.5
-
$106.62- Eaton Cutler-Hammer
- Load Center Cover
- UPC #: 78211309884
- Country of Origin: United States
-
$511.17- Eaton Load Center
- 3 Phase
- 1 NEMA Rating
- 14.31 Inch Wide
- 3.88 Inch Deep
- 16-3/4 Inch High
- Mfr Part #: CH12L3125B
- UPC #: 78211309735
- Country of Origin: United States
-
$455.63- Eaton Relay
- NEMA, IEC
- NEMA Size 1, 2, IEC Size G-K
- Freedom Series
- Panel mounting
- Heaters required
- Ring lug terminals
- 60-79A
- Thermal Trip Type
- Three-pole
-
$266.58- Eaton Relay
- NEMA, IEC
- NEMA Size 00, 0, IEC Size A-F
- DIN rail, panel
- Heaters required
- Used with GST00-160
- 20-39A
- Thermal Trip Type
- Three-pole
-
-
-
$169.39- Eaton Cutler-Hammer
- Thermal Magnetic Trip
- 14-4 AWG
- 2-3/8 Inch Deep
- 2-15/16 Inch High
- 2 Inch Wide
-
$76.65
- Eaton Cutler-Hammer
- Thermal Magnetic Trip
- 14-4 AWG
- 2-3/8 Inch Deep
- 2-15/16 Inch High
- 1 Inch Wide
-
Out of Stock
$7,859.81- LG single frame heat pump unit
- ARUN outdoor series VRF
- MPN: ARUN072DTE4
- Btu/h: 72,000
- Compressor: Inverter HSS DC Scroll
- Refrigerant: R410A
- Min./Max. Indoor Units: 1-13
- Sound Pressure dB(A)4: 58.5
- Material: Copper Tube / Aluminum Fin
- Fin Coating: GoldFin / Hydrophilic
-
Out of Stock
$11,167.00
- LG single frame heat recovery unit
- ARUB outdoor series VRF
- MPN: ARUB144DTE4
- Btu/h: 144,000
- Compressor: Inverter HSS DC Scroll
- Refrigerant: R410A
- Min./Max. Indoor Units: 1-24
- Sound Pressure dB(A)4: 59.5
- Material: Copper Tube / Aluminum Fin
- Fin Coating: GoldFin / Hydrophilic
-
$1,600.35- Eaton Thermal Overload
- 45 Amp
- NEMA Size 2
- Non-reversing Starter
- Freedom
- 600V Rated
- 3-Phase Magnetic
- Thermal Overload Relay
- 120 VAC/ 60 Hz – 110 VAC/ 50 Hz Coil
- Starter w/C306 bi-metal OLR
- 3 hp at 115V, 7-1/2 hp at 230V, 10 hp at 208V, 15 hp at 240V, 25 hp at 480,600V
- Heater Pack required for Overload Protection
-
$863.91- Eaton Control
- 27 Amp
- NEMA Size 1
- Non-reversing Starter
- Freedom
- 600V Rated
- Single-phase, three-phase
- Thermal Overload Relay
- 120 VAC/ 60 Hz – 110 VAC/ 50 Hz Coil
- Heater Pack required for Overload Protection
- Starter w/C306 bi-metal OLR
- 2 hp at 115V, 3 hp at 230V, 7-1/2 hp at 208,240V, 10 hp at 480,600V
-
$603.52- Eaton Control
- NEMA Full Voltage Non-reversing Starter
- Freedom
- 3-phase Magnetic
- Starter w/C306 bi-metal OLR
- Size 00
- 3-pole
- Max HP Rating: 1/3 hp at 115V,1 hp at 230V, 1-1/2 hp at 208,240V, 2 hp at 480,600V
- Interchangeable Heater Overload Relay
- 120 Vac/ 60 Hz – 110 Vac/ 50 Hz Coil
- Heater Packs Must Be Purchased Separately
- Amperage: 32
-
$72.00- Hercules Air Handler Stand
- No assembly required
- Foldable structure designed to save on shipping and storage space
- Ultra Heavy Duty Galvanized Steel
- Standard depth of 26”
- Adjustable width from 14 to 24”
- Built in filter rack fits standard 1” filters
- Rubber strips included to minimize vibration
- Plastic caps on bottom of legs
- Frame: 2” x 2” x 1/8” galvanized angles
- Filter rack: 1” x 1” x 16 gauge galvanized steel
- 18”, 24” and 36” height available
-
-
$991.00- Tecumseh Reciprocating Compressor
- Application: HBP/AC – Air Conditioning
- Refrigerant: R22, R407C
- Voltage/Frequency: 200-220V ~ 50Hz
- Voltage/Frequency: 208-230V ~ 60Hz
- Btu/h: 24200
- kcal/h: 6098
- W: 7091
- Phase: 1
- Replaced by Model # AW705EH-093-J7
-
$2,280.00
- Tecumseh Reciprocating Compressor
- Application: HBP/AC – Air Conditioning
- Refrigerant: R22
- Voltage/Frequency: 200-220V ~ 50Hz
- Voltage/Frequency: 208-230V ~ 60Hz
- Btu/h: 57500
- kcal/h: 14490
- W: 5480
-
$153.00- Refrigerant Vacuum Pump
- Voltage: 110-115
- Hz: 60
- CFM: 2.5
- Motor Speed: 3440 RPM
- Ultimate Vacuum: 150 Micron
- 85 LT/HR
- Weight: 17 lbs.
- HP: 1/4
- Inlet Port Size: 1/4 SAE, 3/8 SAE, 1/2 ACME Inch
-
$680.00- Daizuki DXTH Series
- Refrigerant: Pre-Charged R410a
- Accommodating line length up to 25 Ft.
- Application Area: Approx. 250-350 Sq. Ft.
- Number of Zones: 1 Room
- Cooling: 9,000 BTU/H with 20 SEER efficiency
- Heating: 9,500 BTU/H with 12 HSPF efficiency
- Voltage: 110-120
- 60Hz
- 1 Phase
- Wall Mounted Air Conditioning & Heating System
- Variable Speed DC Inverter Operation Mode
- Low Ambient Unit (-13F)
-
$7.93- Run Capacitor
- 80 UF (MFD – Microfarad)
- 370-440 V
- Dielectric
- Welded seal
- Approx. 2″ Diameter x 5.5″ Height
-
$9.29
- Run Capacitor
- 80+5 UF (MFD – Microfarad)
- 370-440 V
- Dielectric
- Welded seal
- Approx. 2″ Diameter x 5.5″ Height
-
$4.25- Start Capacitor
- 72-86 UF (MFD – Microfarad)
- 220-250 V
- Dry Electrolytic
- Dual Terminals w/ Quick Connectors
- Approx. 1.5″ Diameter x 2.75″ Height
-
$7.42
- Run Capacitor
- 70+5 UF (MFD – Microfarad)
- 370-440 V
- Dielectric
- Welded seal
- Approx. 2″ Diameter x 5.5″ Height
-
$5.82
- Run Capacitor
- 50+7.5 UF (MFD – Microfarad)
- 370-440 V
- Dielectric
- Welded seal
- Approx. 2.1″ Diameter x 4.6″ Height
-
$4.19
- Run Capacitor
- 20+5 UF (MFD – Microfarad)
- 370-440 V
- Dielectric
- Welded seal
- Approx. 1.9″ Diameter x 2.8″ Height
-
$2.94
- Run Capacitor
- 17.5 UF (MFD – Microfarad)
- 370-440 V
- Dielectric
- Welded seal
- Approx. 1.9″ Diameter x 2.6″ Height
-
$6.92- Start Capacitor
- 708-850 UF (MFD – Microfarad)
- 110-125 V
- Dry Electrolytic
- Dual Terminals w/ Quick Connectors
- Approx. 1.75″ Diameter x 3.5″ Height
-
$7.99
- Start Capacitor
- 243-292 UF (MFD – Microfarad)
- 220-250 V
- Dry Electrolytic
- Dual Terminals w/ Quick Connectors
- Approx. 2″ Diameter x 3.25″ Height
-
$9.00
- Start Capacitor
- 233-280 UF (MFD – Microfarad)
- 220-250 V
- Dry Electrolytic
- Dual Terminals w/ Quick Connectors
- Approx. 2″ Diameter x 3.25″ Height
-
$4.12
- Start Capacitor
- 189-227 UF (MFD – Microfarad)
- 220-250 V
- Dry Electrolytic
- Dual Terminals w/ Quick Connectors
- Approx. 1.5″ Diameter x 3.5″ Height
-
$4.70- Start Capacitor
- 130-156 UF (MFD – Microfarad)
- 330 V
- Dry Electrolytic
- Dual Terminals w/ Quick Connectors
- Approx. 1.75″ Diameter x 4.5″ Height
-
$4.96
- Start Capacitor
- 130-154 UF (MFD – Microfarad)
- 110-125 V
- Dry Electrolytic
- Dual Terminals w/ Quick Connectors
- Approx. 1.5″ Diameter x 2.75″ Height
-
$6.19
- Start Capacitor
- 124-149 UF (MFD – Microfarad)
- 220-250 V
- Dry Electrolytic
- Dual Terminals w/ Quick Connectors
- Approx. 1.5″ Diameter x 2.75″ Height
-
$4.76
- Start Capacitor
- 124-149 UF (MFD – Microfarad)
- 110-125 V
- Dry Electrolytic
- Dual Terminals w/ Quick Connectors
- Approx. 1.5″ Diameter x 2.75″ Height
-
$4.28
- Start Capacitor
- 108-130 UF (MFD – Microfarad)
- 330 V
- Dry Electrolytic
- Dual Terminals w/ Quick Connectors
- Approx. 1.75″ Diameter x 4.5″ Height
-
$2.61
- Start Capacitor
- 108-130 UF (MFD – Microfarad)
- 110-125 V
- Dry Electrolytic
- Dual Terminals w/ Quick Connectors
- Approx. 1.5″ Diameter x 2.75″ Height
-
$11.12- Eaton Cutler-Hammer
- Color: Green
- UPC #: 78211314809
- Big Book Page #: 3679
- Country of Origin: Dominican Republic
-
$45.85- Eaton Cutler-Hammer
- 120 VAC/VDC
- Pressure Terminal
- 30-1/2mm Hole
- For Use with E34 Operators
- Standard 10250T
