- 50-foot pre-flared R-454B line set — compatible with DIY 6K, 9K & 12K Indoor w/ DIY Pro Cable
- Line sizes: 1/4″ + 3/8″ — correct fit for your MRCOOL system
- R-454B compatible — works with all MRCOOL 5th Gen and current systems
- Pre-flared ends — no flaring tools required
- Ships fast — free standard shipping
Shop HVAC Parts, Tools & Equipment
- Furnaces
- A/C Stands
- A/C Systems
- Accessories
- Actuators
- Air Curtains
- Blower Wheels
- Capacitors
- Circuit Breakers
- Coils
- Compressors
- Condensing Units
- Contactors
- Control Boards
- Controls
- Copper Tubing
- Evaporative Coolers
- Fan Blades
- Filter Driers
- Fittings
- Gaskets
- Heaters
- Hinges
- Insulation
- Lamps
- Latches
- Line Sets
- Meters
- Moisture Indicators
- Motors
- Oil Separators
- Oils
- Overloads
- Pumps
- PVC Curtains
- Relays
- Sensors
- Service Kits
- Shaft Seal Kits
- Solder And Brazing
- Start Kits
- Suction Line Accumulators
- Switches
- Tapes
- Thermometers
- Thermostats
- Timers
- Tools
- Transformers
- Valves
- VFDs
- Vibration Eliminators
- Voltage Protectors
- Water Heaters
-
$869.00- Everwell strip door curtain PVC
- Dimensions: 8″ x .080″ x 300′
- Description: Reinforced (Clear)
- Bulk roll
- Version: Made In USA
-
$639.00
- Everwell strip door curtain PVC
- Dimensions: 8″ x .080″ x 300′
- Description: Reinforced (Clear)
- Bulk roll
-
-
-
$2,022.00- Danfoss Hermetic (Reciprocating) Compressor
- Phase: 3
- Hz: 50/60
- BTU/h: 42,000
- Replacement for Bristol Model # H23A423DBLA
-
$2,311.00- Copeland Scroll Compressor
- 6.3 Ton / 76,000 BTU
- 50/60 Hz
- 380-460 Volts.
- Refrigerant: R410A
- 3 Phase
- Replaces Model # ZP76KCE-TFD-130
-
$59.00- Everwell suction line filter drier
- Size: 3/4″ ODF
- Max: 600 PSI / 4140 Kpa
- Connection: Solder
-
$194.00- Brand YELLOW JACKET
- Manufacturer Part Number 42024
- Number of Valves 2
- Number of Hoses 3
- Display Type Analog
- Gauge Type High Side/Low Side
- Gauge Diameter 3-1/8 in
- Display Illumination Non-Illuminated
- High Side Display Pressure – Minimum 0 psi
- High Side Display Pressure – Maximum 800 psi
- Low Side Display Pressure – Minimum 30 in Hg
- Low Side Display Pressure – Maximum 800 psi
- For Refrigerant Type R-32, R-410A
-
-
-
-
-
-
$34.00- TGM ductless bracket mount support
- Vertical: 17.7 inch
- Horizontal: 23.6 inch
- Width: 33.4 inch
-
$1,322.00- Complete TGM ductless mini split heat pump set
- 3 Ton / 36,000 BTU cooling and heating
- 17 SEER2 inverter efficiency
- Pre-charged R-32 refrigerant
- 208-230V / 1Ph / 60Hz
- Covers roughly 1,000 to 1,400 sq. ft.
- Single zone, Wi-Fi control included
- 10 ft. installation kit included
- AHRI and ETL certified
-
$3,391.00- Copeland Reciprocating / Hermetic Compressor
- 3.5 Ton / 41,700 BTU
- 3 Phase
- Compatible with R22 refrigerant
- 208-230 V
- Replaces Tecumseh Model # AVB5542EXT
-
$256.00MRCOOL MVPHK20 — MRCOOL VersaPro Heat Kit 20kW The MRCOOL MVPHK20 (manufacturer part MVPHK20) is a genuine OEM heat kit available at Cedars HVAC, your trusted source for heating, cooling, and refrigeration parts. We stock this heat kit for fast nationwide shipping from our Miami warehouse, so contractors, facility managers, […]
-
$216.00
MRCOOL MVPHK15 — MRCOOL VersaPro Heat Kit 15kW The MRCOOL MVPHK15 (manufacturer part MVPHK15) is a genuine OEM heat kit available at Cedars HVAC, your trusted source for heating, cooling, and refrigeration parts. We stock this heat kit for fast nationwide shipping from our Miami warehouse, so contractors, facility managers, […]
-
$176.00
MRCOOL MVPHK10 — MRCOOL VersaPro Heat Kit 10kW The MRCOOL MVPHK10 (manufacturer part MVPHK10) is a genuine OEM heat kit available at Cedars HVAC, your trusted source for heating, cooling, and refrigeration parts. We stock this heat kit for fast nationwide shipping from our Miami warehouse, so contractors, facility managers, […]
-
-
-
-
-
-
-
$868.00- 4-5 Ton MRCOOL multi-positional cased coil – 24.5 inch cabinet width
- Pre-charged with R-454B refrigerant
- Multi-positional: upflow, downflow, or horizontal
- Ships free to your door
-
$939.00
- 4-5 Ton MRCOOL multi-positional cased coil – 21 inch cabinet width
- Pre-charged with R-454B refrigerant
- Multi-positional: upflow, downflow, or horizontal
- Ships free to your door
-
$668.00
- 2.5-3 Ton MRCOOL multi-positional cased coil – 17.5 inch cabinet width
- Pre-charged with R-454B refrigerant
- Multi-positional: upflow, downflow, or horizontal
- Ships free to your door
-
$610.00
- 1.5-2 Ton MRCOOL multi-positional cased coil – 17.5 inch cabinet width
- Pre-charged with R-454B refrigerant
- Multi-positional: upflow, downflow, or horizontal
- Ships free to your door
-
$568.00
- 1.5-2 Ton MRCOOL multi-positional cased coil – 14.5 inch cabinet width
- Pre-charged with R-454B refrigerant – no nitrogen charge or vacuum required
- Multi-positional: upflow, downflow, or horizontal installation
- Designed for use with MRCOOL or compatible split system condensers
- Ships free to your door
-
$1,150.00- 36,000 BTU MRCOOL DIY Hybrid air handler — for ducted/semi-ducted installations
- Only compatible with MRCOOL DIY condensers
- Enables duct-run distribution from a single DIY condenser
- Ships free to your door
-
$997.00
- 24,000 BTU MRCOOL DIY Hybrid air handler — designed for ducted or semi-ducted applications
- Only compatible with MRCOOL DIY condensers
- Allows DIY mini-split owners to add duct runs for multi-room distribution
- R-454B compatible
- Ships free to your door
-
$1,896.00- 24K BTU MRCOOL DIY Select complete system 230V
- Includes air handler condenser and 11.5ft install kit
- R-454B refrigerant no vacuum pump needed
- True DIY installation
- Free shipping
-
MRCOOL® DIY50-1438C-O — R-454B 50ft 1/4″ + 3/8″ Lineset for DIY 6K, 9K & 12K Indoor w/ DIY Pro Cable
$584.00 -
$596.00
- 50-foot pre-flared R-454B line set — compatible with DIY 18K Indoor w/ DIY Pro Cable
- Line sizes: 1/4″ + 1/2″ — correct fit for your MRCOOL system
- Includes DIY Pro Cable — plug-and-play electrical connection for DIY installations
- R-454B compatible — works with all MRCOOL 5th Gen and current systems
- Pre-flared ends — no flaring tools required
- Ships fast — free standard shipping
-
$562.00
- 35-foot pre-flared R-454B line set — compatible with DIY 24K & 36K Indoor w/ DIY Pro Cable
- Line sizes: 3/8″ + 5/8″ — correct fit for your MRCOOL system
- Includes DIY Pro Cable — plug-and-play electrical connection for DIY installations
- R-454B compatible — works with all MRCOOL 5th Gen and current systems
- Pre-flared ends — no flaring tools required
- Ships fast — free standard shipping
-
$499.00
- 35-foot pre-flared R-454B line set — compatible with DIY 6K, 9K & 12K w/ DIY Pro Cable
- Line sizes: 1/4″ + 3/8″ — correct fit for your MRCOOL system
- Includes DIY Pro Cable — plug-and-play electrical connection for DIY installations
- R-454B compatible — works with all MRCOOL 5th Gen and current systems
- Pre-flared ends — no flaring tools required
- Ships fast — free standard shipping
-
$507.00
- 35-foot pre-flared R-454B line set — compatible with DIY 18K Indoor w/ DIY Pro Cable
- Line sizes: 1/4″ + 1/2″ — correct fit for your MRCOOL system
- Includes DIY Pro Cable — plug-and-play electrical connection for DIY installations
- R-454B compatible — works with all MRCOOL 5th Gen and current systems
- Pre-flared ends — no flaring tools required
- Ships fast — free standard shipping
-
$118.00- Heavy-duty wall bracket for 24K & 36K mini-split condensers
- Reinforced for larger, heavier outdoor units
- Galvanized steel — rust and weather resistant
- Elevates condenser off ground for better protection
- MRCOOL OEM bracket — guaranteed fit for DIY 5th Gen 24K & 36K
-
$610.00
- 25-foot pre-flared R-454B line set — compatible with DIY 24K & 36K Indoor w/ DIY Pro Cable
- Line sizes: 3/8″ + 5/8″ — correct fit for your MRCOOL system
- Includes DIY Pro Cable — plug-and-play electrical connection for DIY installations
- R-454B compatible — works with all MRCOOL 5th Gen and current systems
- Pre-flared ends — no flaring tools required
- Ships fast — free standard shipping
-
$74.00- Heavy-duty wall bracket for 9K, 12K & 18K mini-split condensers
- Keeps condenser off the ground — protects from flooding and debris
- Galvanized steel construction — rust-resistant for outdoor use
- Universal fit for MRCOOL and most mini-split brands
- Required for most wall-mount installations
-
$454.00
- 25-foot pre-flared R-454B line set — compatible with DIY 24K & 36K Indoor Indoor
- Line sizes: 3/8″ + 5/8″ — correct fit for your MRCOOL system
- R-454B compatible — works with all MRCOOL 5th Gen and current systems
- Pre-flared ends — no flaring tools required
- Ships fast — free standard shipping
-
$130.00- 16-piece complete line set cover kit in gray
- 4.5″ channel — fits most mini-split and central system line sets
- Gray finish — ideal for darker exterior walls and siding
- UV-resistant PVC — built for outdoor use
- Complete kit — no additional pieces needed
-
$789.00- 4,500 watt dual-element heating — fast, reliable hot water
- 50-gallon tank — high-capacity for larger families, tall design
- Tall-profile design for standard utility rooms
- Free shipping — delivered to your door
- Authorized MRCOOL distributor — full warranty coverage
-
MRCOOL® DIY25-1438C-O — R-454B 25ft 1/4″ + 3/8″ Lineset for DIY 6K, 9K & 12K Indoor w/ DIY Pro Cable
$406.00- 25-foot pre-flared R-454B line set — compatible with DIY 6K, 9K & 12K w/ DIY Pro Cable
- Line sizes: 1/4″ + 3/8″ — correct fit for your MRCOOL system
- Includes DIY Pro Cable — plug-and-play electrical connection for DIY installations
- R-454B compatible — works with all MRCOOL 5th Gen and current systems
- Pre-flared ends — no flaring tools required
- Ships fast — free standard shipping
-
$129.00
- 16-piece complete line set cover kit — everything needed to conceal line sets
- 4.5″ channel — fits most mini-split and central system line sets
- Clean white finish — blends with exterior walls
- UV-resistant PVC — built for outdoor durability
- DIY-friendly installation — no special tools
-
$916.00
- 4,500 watt dual-element heating — fast, reliable hot water
- 50-gallon tank — ideal for larger families, 4-5 people
- Standard profile — easy replacement for most homes
- Free shipping — delivered to your door
- Authorized MRCOOL distributor — full warranty coverage
-
$883.00- 15,000 BTU cooling + heat pump heating — 2.5kW electric heat strip
- 9.6 EER efficiency rating — commercial-grade performance
- 265V single-phase — standard PTAC voltage
- Heat pump provides efficient heating + cooling year-round
- Ideal for hotels, motels, apartments, and commercial spaces
- Free shipping — dropship delivery
