Shop
- Uncategorized
- A/C Stands
- A/C Systems
- Accessories
- Actuators
- Air Curtains
- Blower Wheels
- Capacitors
- Circuit Breakers
- Coils
- Compressors
- Contactors
- Control Boards
- Controls
- Copper Tubing
- Evaporative Coolers
- Fan Blades
- Filter Driers
- Filters (Media)
- Fittings
- Gaskets
- Hard Start Kits
- Heaters
- Hinges
- Insulation
- Lamps
- Latches
- Line Sets
- Meters
- Moisture Indicators
- Motors
- Oil Separators
- Oils
- Overloads
- Pumps
- PVC Curtains
- Refrigeration Systems
- Relays
- Sensors
- Service Kits
- Shaft Seal Kits
- Solder And Brazing
- Suction Line Accumulators
- Switches
- Tapes
- Thermometers
- Thermostats
- Timers
- Tools
- Transformers
- Valves
- VFDs
- Vibration Eliminators
- Voltage Protectors
- Water Heaters
-
$274.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$214.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$209.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$159.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$149.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$114.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
Out of Stock
$99.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$255.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$180.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$135.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$104.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$79.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$74.75
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$37.99- Pioneer foldable mini split mount bracket set
- Heavy Duty Steel Construction, Galvanized and Epoxy Painted.
- Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.
- 4 Rubber vibration absorbers also included.
- Multiple sizes to choose from. Pick the bracket that fits the BTU output of your machine.
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
-
$33.99
- Pioneer foldable mini split mount bracket set
- Heavy Duty Steel Construction, Galvanized and Epoxy Painted.
- Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.
- 4 Rubber vibration absorbers also included.
- Multiple sizes to choose from. Pick the bracket that fits the BTU output of your machine.
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
-
$28.99
- Pioneer foldable mini split mount bracket set
- Heavy Duty Steel Construction, Galvanized and Epoxy Painted.
- Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.
- 4 Rubber vibration absorbers also included.
- Multiple sizes to choose from. Pick the bracket that fits the BTU output of your machine.
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
-
$133.00- IEC Actuator
- Voltage: 24
- 2 Position
- Normally Closed
- 50/60 Hz
- 6.5 Watts
- Mfr. Model #: Erie AG13A060E1
-
$168.13- IEC Actuator
- Voltage: 24
- 96 Inch lead
- Normally Open
- 3W / 2W
- Mfr. Model #: Taco ZB2494H1
- Replaces: B035-71488507
-
$135.94- IEC Actuator
- Voltage: 24
- 2 Position
- Normally Open
- 50/60 Hz
- 6.6 Watts
- Mfr. Model #: Erie AG23A060E1
-
$162.95- IEC Actuator
- Voltage: 24
- 2 Position
- Normally Closed
- 50/60 Hz
- 6.6 Watts
- Mfr. Model #: Erie AH14A060E1
-
$239.74- IEC Actuator
- Voltage: 24
- Proportional Control
- 50/60 Hz
- 1.7VA
- Mfr. Model #: Erie AP33A000E
-
$27.89
- Pioneer foldable mini split mount bracket set
- Heavy Duty Steel Construction, Galvanized and Epoxy Painted.
- Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.
- 4 Rubber vibration absorbers also included.
- Multiple sizes to choose from. Pick the bracket that fits the BTU output of your machine.
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
-
$34.75- KWIK-E-VAC line set flushing kit
- Flush the air and other non-condensable gases out of the copper line set and indoor unit
- Alternative for the inefficient and expensive quick-connect line sets
- Cost-effective, simple, and quick evacuation
- Perfect for most people and installations
-
$51.73- QE infrared thermometer
- 8″ to 1″ ratio
- Temp. Range: -26° to 536° F / -32° to 280° C
-
$318.00- Grundfos Circulator Pump
-
Material: Stainless Steel
-
Application: Heating
-
Type: 1-Speed Pump
-
Horse Power: 1/12
-
Voltage: 115V
-
Connection Type: Flanged x Flanged
-
Max Flow (GPM): 20.7
-
Flow Range (GPM): 0-20.7
-
Max Head (Ft): 9.84
-
Head Range (ft.): 0-9.84
-
Poles: 2
-
Phase: 1
-
Hertz: 60
-
Frequency: 60 Hz
-
Mount: In-Line
- Replaces Model #: 59896125
-
$390.00- Grundfos Circulator Pump
- Product name: UPS 26-99 FC
- Product No.: 52722513
- EAN: 5700834818714
- Material: Cast Iron
- Application: Heating
- Voltage: 230v
- Max Pressure (PSI): 145
- Type: 3-Speed Pump
- Features: Integral Check Valve
- Horse Power: 1/6
- Flow Range (GPM): 0-33
- Max Flow (GPM): 33
- Max Head (Ft): 29
- Head Range (ft.): 0-29
- Hertz: 60
- Phase: 1
- RPM: 3380
- Temperature Range (F): 36°F – 230°F
- Connection Size: 3/4″, 1-1/4″, 1-1/2″, 1″
- Connection Type: Flanged
-
$305.00- Grundfos Circulator Pump
- Product name: UP 15-29 SU
- Product No.: 59896775
- EAN: 5700837414463
- Material: Stainless Steel
- Amperage: 0.42
- Application: Heating
- Voltage: 115v
- Connection Type: Union
- Connection Size: 3/4″, 1/2″
- Max Pressure (PSI): 145
- Type: 1-Speed Pump
- Horse Power: 1/12
- Flow Range (GPM): 0-20.5
- Max Flow (GPM): 20.5
- Max Head (Ft): 9.7
- Head Range (ft.): 0-9.7
- Hertz: 60
- Phase: 1
- Temperature Range (F): 36°F – 230°F
- Replaces: 59896127 (UP15-18SU)
-
Out of Stock
$216.92- Grundfos 4 zone pump control
- Input power 60 Hz: 120 VAC
- Transformer voltage: 24 VAC, 40 VA, Class 2
- Thermostat output [A]: 0.375, 0.5, 0.75
- Maximum single phase motor rating. Per zone [A}: 5
- Maximum combined load rating: output @ 120 VAC [A}: 20
- Temperature range (storage) [°F (°C)]: 50-100 (10-38)
- Temperature range (maximum operation) [°F (°C)]: 0-100 (-18-38)
- Maximum operating humidity range % RH: 90%
- Number of knockouts: 12
-
Out of Stock
$74.80- Hydroflex HSS Hose Kit Series
- Size: 3/4″ ID
- Length: 36″
- Working PSI: 500
- Bend Radius: 7″
- Cv: 20
- 304L Stainless Steel
- Each Hose: Male Fixed (MNPT) / Male Swivel (MNPT)
-
Out of Stock
$74.80
- Hydroflex HSS Hose Kit Series
- Size: 3/4″ ID
- Length: 24″
- Working PSI: 500
- Bend Radius: 7″
- Cv: 20
- 304L Stainless Steel
- Each Hose: Male Fixed (MNPT) / Male Swivel (MNPT)
-
Out of Stock
$54.40
- Hydroflex HSS Hose Kit Series
- Size: 1/2″ ID
- Length: 36″
- Working PSI: 500
- Bend Radius: 5″
- Cv: 7
- 304L Stainless Steel
- Each Hose: Male Fixed (MNPT) / Male Swivel (MNPT)
-
$521.47- IEC direct drive fan coil motor
- HP: 1/3
- Volts: 115
- Hz: 60
- Phase: 1
- RPM: 1075
- Enclosure: Open Air Over
- Type: AC
- Used In Units: HI-STATIC (117) M*Y12 UNITS
- Mfr. Model: GE # 5KCP39MGS590S
-
$467.01- IEC direct drive fan coil motor
- HP: 1/8
- Volts: 277
- Hz: 60
- Phase: 1
- RPM: 1100
- Enclosure: Open Air Over
- Type: AC
- Used In Units: B*Y04, 06, 08, 10 UNITS
- Mfr. Model: GE # 5KCP29DK6498S
-
$387.00- IEC direct drive fan coil motor
- HP: 1/4
- Volts: 115
- Hz: 60
- Phase: 1
- FLA: 5.1
- RPM: 1020
- Enclosure: Open Air Over
- Type: AC
- Shaft Length: 5.25 Inch
- Used In Units: M*Y12, HIGH STATIC (118) MOD 10, HIGH STATIC (115) MOD 08 UNITS
- Mfr. Model: GE # 5KCP29MK6015CS
- Capacitor: 20uF @ 370V
-
$357.00
- IEC direct drive fan coil motor
- HP: 1/5
- Volts: 115
- Hz: 60
- Phase: 1
- FLA: 3.3
- RPM: 1075
- Enclosure: Open Air Over
- Type: AC
- Used In Units: M*Y10, HI-STATIC (114) MOD 06 UNITS
- Mfr. Model: AO SMITH # F42B29A80, FASCO # 7187-0311, GE # 5KCP29MK6014S
- Capacitor: 12.5uF @ 370V
-
$291.00- IEC direct drive fan coil motor
- HP: 1/8
- Volts: 115
- Hz: 60
- Phase: 1
- FLA: 2.7
- RPM: 950
- Enclosure: Open Air Over
- Type: AC
- Used In Units: HLY08, HPY-HXY-VEY06, 12, HHY06 UNITS
- Mfr. Model: GE #: 5KCP29KK6098S
-
$572.18
- IEC direct drive fan coil motor
- HP: 1/5
- Volts: 115
- Hz: 60
- Phase: 1
- FLA: 4.4
- RPM: 1020
- Enclosure: Open Air Over
- Type: AC
- Used In Units: HLY10, 18, 20, HPY14 UNITS
- Mfr. Model: GE #: 5KCP29HK6101S
-
$660.00- IEC belt drive fan coil motor
- HP: 3/4
- Volts: 208-230/460
- Hz: 60
- Phase: 3
- AMP: 3.3-3.0/1.5
- RPM: 1725
- Enclosure: ODP
- Type: Ball Bearing
- Frame: 56
- Lead time: Typically 1-2 weeks
-
$567.00- IEC direct drive fan coil motor
- HP: 1/20
- Volts: 265-277
- Hz: 60
- Phase: 1
- FLA: 0.4
- RPM: 1100
- 3 Speeds
- Enclosure: Open Air Over
- Type: AC
- Used In Units: M*Y04 WITH SPECIAL NARROW CABINET
- Mfr. Model: GE #: 5KCP20FK8951S, 5KCP20FK8951AS
-
$466.00
- IEC direct drive fan coil motor
- HP: 1/5
- Volts: 265-277
- Hz: 60
- Phase: 1
- 601.1A
- FLA: 1.19
- RPM: 1075
- Enclosure: Open Air Over
- Type: AC
- Used In Units: HIGH STATIC (122) MOD 06 UNITS
- Mfr. Model: GE #: 5KCP29MK8229S
