Shop
- Uncategorized
- A/C Stands
- A/C Systems
- Accessories
- Actuators
- Air Curtains
- Blower Wheels
- Capacitors
- Circuit Breakers
- Coils
- Compressors
- Contactors
- Control Boards
- Controls
- Copper Tubing
- Evaporative Coolers
- Fan Blades
- Filter Driers
- Filters (Media)
- Fittings
- Gaskets
- Hard Start Kits
- Heaters
- Hinges
- Insulation
- Lamps
- Latches
- Line Sets
- Meters
- Moisture Indicators
- Motors
- Oil Separators
- Oils
- Overloads
- Pumps
- PVC Curtains
- Refrigeration Systems
- Relays
- Sensors
- Service Kits
- Shaft Seal Kits
- Solder And Brazing
- Suction Line Accumulators
- Switches
- Tapes
- Thermometers
- Thermostats
- Timers
- Tools
- Transformers
- Valves
- VFDs
- Vibration Eliminators
- Voltage Protectors
- Water Heaters
-
$180.00- Grundfos Zone Valve
- Connection Type: Sweat
- Size: 1″
- Voltage: 24v
- Position: Normally Closed
- End Switch: Yes
- Min Fluid Temp: 33°F
- Max Fluid Temp: 240°F
- Body Pattern: 2-Way
- Flow Capacity (Cv): 7.5
-
$113.46- Grundfos Zone Valve
- Connection Type: Sweat
- Size: 3/4″
- Voltage: 24v
- Position: Normally Closed
- End Switch: Yes
- Min Fluid Temp: 33°F
- Max Fluid Temp: 240°F
- Body Pattern: 2-Way
- Flow Capacity (Cv): 7.5
-
$122.36- Grundfos Zone Valve
- Connection Type: Threaded
- Size: 3/4″
- Position: Normally Closed
- Voltage: 24v
- End Switch: Yes
- Min Fluid Temp: 33°F
- Max Fluid Temp: 240°F
- Flow Capacity (Cv): 3.5
- Body Pattern: 2-Way
-
$133.00- Chem Penn quick refrigerant recharge R410a
- 1.8 lbs of Pro Charge
- Refrigerant pre-blended
- With UV Dye & Leak Sealant
-
$33.50- Pioneer Leak Stop Syringe
- One syringe is 6 ml and is enough for systems up to 30,000 BTUs.
- Can be injected into the system directly from the service port.
- Harmless to all internal components.
-
$12.00- Pioneer vibration absorber feet kit
- Made of natural rubber
- With galvanized stud and nut.
- One set includes 4 pieces
- Super Heavy Duty
- Can Handle up to 250 lbs.
-
$10.00- Pioneer condensate drain hose
- Material: Ethylene Vinyl Acetate
- Fully Flexible
- Clear Color
- 10′ Long x 5/8″ Diameter Ends
-
$22.99- Pioneer vibration absorber feet kit
- Made of natural rubber
- With galvanized stud and nut.
- One set includes 4 pieces
- Super Heavy Duty
- Can Handle up to 264 lbs.
-
$87.00- Pioneer UVC bacterial disinfection kit
- Super compact / High intensity
- Easy fit with simple installation
- 85-265 VAC wide range power supply
- Cut-to-length LED strip design
- Water resistance / Heat dissipation
- 50,000 hours+ expected LED life
- Three years system warranty
- Designed to fit major brands
- For Wall-Mount, Floor-Ceiling & Cassette
-
$25.50- Pioneer Kit
- Convenient Accessories kit for Mini Split System Installations.
- Wall hole sleeve / liner and seal cap (2.5″ Internal Diamater).
- 10 foot long condensate drain extension hose.
- Non adhesice wrapping tape (50′ ling x 2″ wide).
- Putty for sealing the wall opening (8 Ounces).
-
$6.99- Pioneer pipe wrapping A/C tape
- Material: PVC
- Fully Flexible
- Off White Color
- 50′ Long, 2″ Wide
-
$98.00The Pioneer professional grade 4 lead electrical cable offers exceptional performance. Rated for outdoor or indoor use, this cable is the perfect choice for outdoor installations, be it above or underground. Features: 16 AWG – 4 standard conductors, Tough, yet flexible black insulated jacket is marked with a stripe on one side for polarity and FT count for easy installation, and 1.31 mm conductors provide exceptional performance.
-
$73.25
- Pioneer 4 lead electrical wire
- 16 AWG
- 1.31 mm2
- 4/C Type SJOOW
- 300U
- Max Temp.: -40 to 194 F
- Water Resistant
- UL # E251603
- CSA # LL255459
-
Out of Stock
-
Out of Stock
-
$49.00
- Pioneer 4 lead electrical wire
- 16 AWG
- 1.31 mm2
- 4/C Type SJOOW
- 300U
- Max Temp.: -40 to 194 F
- Water Resistant
- UL # E251603
- CSA # LL255459
-
$32.00
- Pioneer 4 lead electrical wire
- 16 AWG
- 1.31 mm2
- 4/C Type SJOOW
- 300U
- Max Temp.: -40 to 194 F
- Water Resistant
- UL # E251603
- CSA # LL255459
-
$24.00
- Pioneer 4 lead electrical wire
- 16 AWG
- 1.31 mm2
- 4/C Type SJOOW
- 300U
- Max Temp.: -40 to 194 F
- Water Resistant
- UL # E251603
- CSA # LL255459
-
$15.00
- Pioneer 4 lead electrical wire
- 16 AWG
- 1.31 mm2
- 4/C Type SJOOW
- 300U
- Max Temp.: -40 to 194 F
- Water Resistant
- UL # E251603
- CSA # LL255459
-
$9.89
- Pioneer 4 lead electrical wire
- 16 AWG
- 1.31 mm2
- 4/C Type SJOOW
- 300U
- Max Temp.: -40 to 194 F
- Water Resistant
- UL # E251603
- CSA # LL255459
-
$63.99- Pioneer floor mounting base kit
- Mount directly onto concrete or leave unfastened as desired
- Outer rubber shell provides superior vibration absorption
-
$53.89
- Pioneer floor mounting base kit
- Mount directly onto concrete or leave unfastened as desired
- Outer rubber shell provides superior vibration absorption
-
$43.99
- Pioneer floor mounting base kit
- Mount directly onto concrete or leave unfastened as desired
- Outer rubber shell provides superior vibration absorption
-
$395.00- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$34.00- Pioneer USB wireless internet dongle
- Plugs into any WYS Model Ductless Split System.
- Allows worldwide access and control of your system.
- Free downloadable app for IOS or Android.
-
$300.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$274.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$214.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$209.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$159.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$149.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$114.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$99.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$255.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$180.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$135.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$104.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$79.00
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$74.75
- Pioneer R410a compatible copper pipes
- 3 layer insulation
- Brass flare nuts
- Includes the following:
- Insulated pre-flared copper refrigerant pipes (length and diameter as chosen)
- 4 lead communication wire between indoor and outdoor unit (same length as chosen)
- 10 ft. condensate drain hose
- Wall passage sleeve with cap and putty
- Non-adhesive wrapping tape (2″ wide, 50′ length)
-
$38.00- Pioneer foldable mini split mount bracket set
- Heavy Duty Steel Construction, Galvanized and Epoxy Painted.
- Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.
- 4 Rubber vibration absorbers also included.
- Multiple sizes to choose from. Pick the bracket that fits the BTU output of your machine.
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
